Quantcast

Panansonic DMC-LS60

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Panansonic DMC-LS60

Miclaus Andrei
lsusb:
======== OUTPUT==========
Bus 001 Device 004: ID 04da:2372 Panasonic (Matsushita) Lumix Camera (Storage mode)
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==========================


gphoto2 --auto-detect
======== OUTPUT==========
Model                                      Port
----------------------------------------------------------
Mass Storage Camera            disk:/media/pi/687F-699C
==========================


LANG=C gphoto2 --summary >summary.txt
======== OUTPUT==========
*** Error ***
This camera does not provide any configuration options.
*** Error (-6: 'Unsupported operation') ***
==========================


LANG=C gphoto2 --list-all-config >config.txt
======== OUTPUT==========
*** Error ***
This camera does not provide any configuration options.
*** Error (-6: 'Unsupported operation') ***
==========================


gphoto2 --capture-image
======== OUTPUT==========*** Error ***
This camera can not capture.
ERROR: Could not capture image.
ERROR: Could not capture.
*** Error (-6: 'Unsupported operation') ***

For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <[hidden email]>, please run
gphoto2 as follows:

    env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image

Please make sure there is sufficient quoting around the arguments.
==========================


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Gphoto-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

config.txt (584 bytes) Download Attachment
summary.txt (572 bytes) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Panansonic DMC-LS60

Marcus Meissner-4
Hi,

The device is in mass storage here. You could switch it in the camera to be "PTP".

But I think that Panasonic does only allow downloading of images, but no remote control.

Ciao, Marcus
On Sun, Mar 26, 2017 at 05:18:51PM +0000, Miclaus Andrei wrote:

> lsusb:
> ======== OUTPUT==========Bus 001 Device 004: ID 04da:2372 Panasonic (Matsushita) Lumix Camera (Storage mode)
> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub==========================
>
> gphoto2 --auto-detect
> ======== OUTPUT==========Model                                      Port
> ----------------------------------------------------------
> Mass Storage Camera            disk:/media/pi/687F-699C
> ==========================
>
> LANG=C gphoto2 --summary >summary.txt
> ======== OUTPUT==========*** Error ***
> This camera does not provide any configuration options.
> *** Error (-6: 'Unsupported operation') ***==========================
>
> LANG=C gphoto2 --list-all-config >config.txt
> ======== OUTPUT==========*** Error ***
> This camera does not provide any configuration options.
> *** Error (-6: 'Unsupported operation') ***==========================
>
>
> gphoto2 --capture-image
> ======== OUTPUT==========*** Error ***
> This camera can not capture.
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-6: 'Unsupported operation') ***
>
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <[hidden email]>, please run
> gphoto2 as follows:
>
>     env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
>
> Please make sure there is sufficient quoting around the arguments.
> ==========================
>

> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <[hidden email]>, please run
> gphoto2 as follows:
>
>     env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-all-config
>
> Please make sure there is sufficient quoting around the arguments.
>

> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <[hidden email]>, please run
> gphoto2 as follows:
>
>     env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --summary
>
> Please make sure there is sufficient quoting around the arguments.
>

> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot

> _______________________________________________
> Gphoto-devel mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Gphoto-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
Loading...